MSG Team's other articles

11944 Why Cities are the Future and What this Means for Investors and Businesses

Cities are the Future of the World The future of the world would be in cities and urban and semi-urban regions and hence, it is better for governments, businesses, investors, and citizen groups to prepare for an urbanized world where sustainability of the urban modes of living and working would increasingly be strained by inadequate […]

9878 Lessons for the Indian BPO Sector from the Standard Chartered and HSBC Scandals

The regulatory scandals involving HSBC and Standard Chartered (2013) have brought into focus the issue of how the outsourcing of business processes including oversight and compliance has meant that standards have been relaxed. Since both the scandals involved Indian back office operations looking the other way when they should have raised red flags, there are […]

9962 The Interconnectedness between the American Economy and the World Economy

It is often said that when America sneezes, the entire world catches a cold. This is because of the high degree of integration between the American economy and other economies of the world. Ever since World War 2 ended, America became a dominant economic power. This led to increased integration between the American economy and […]

10047 Is India on the Brink of a Serious Economic Crisis?

Widening Current Account Deficit The first and most important problem facing the Indian economy is the widening current account deficit or the CAD. The CAD refers to the difference between the exports and the imports, which is always a deficit for countries like India that are dependent on imports of oil for their economy. However, […]

8924 Development of Services that Support International Business

Ecosystem of Services Any business in order to function and grow needs an ecosystem of suppliers, vendors, and infrastructure that supports the operations of the business. For instance, if a certain company wants to setup its operations in a particular place, it needs land, roads, water and power supply, and vendors and suppliers to supply […]

Search with tags

  • No tags available.

Measurement Systems Analysis is a complicated exercise. However, Six Sigma provides a step by step procedure to conduct it. Also, as usual, the focus of the executives should be to understand the focus of the exercise and interpretation of the results. The complex calculations can be performed by software. Here is the 4 step procedure.

Step 1: Plan the Study

Before any study needs to be conducted, there must be a proper plan in place. This ensures that the study can be conducted with minimal wastage of time, money, efforts and other resources. Measurement System Analysis is no exception to this rule. Here is how to create a basic plan for measurement system analysis:

Confirm the Key Measures: Any process consists of a large number of measures. The sum total of these measures is called the measurement system. Just like there are many inputs, but only few of them are vital and have any meaningful impact on the outputs, similar is the case with measures. The same approach i.e. to conduct a Pareto analysis must be followed and key measures must be developed. Usually, the key measures correspond to the critical inputs or outputs already identified in the Define stage.

Develop Operational Definition: The next step must be to come up with exact operational definitions for these measures. Since an entire analysis is going to be conducted on these measures, they must be standardized. The operational definition helps eliminate any ambiguity.

Step 2: Conduct the Study

There are a few decisions which need to be made during the course of the analysis. They are as follows:

Determine Number of Measurement Trials: The optimum number of trials that are enough to decide whether a measure is appropriate or not must be decided. This can be considered analogous to the sample size that is used while conducting experiments.

Determine Organization of Trials: Trials can be collected at the same time or at different times of the day. The frequency, with which the trials are collected, plays a vital role in the analysis. Therefore it must be carefully decided.

Different Operators: The study must be designed to negate the influence of a specific operator. Hence data must be collected from different people.

Different Equipment: The study must also negate the influence of specific machines. For instance, if a machine is newer than the other, it may function better as compared to the other. Such influences must be negated to reach the true measurement variation.

Different Conditions: The study must be planned in such a way that trials must be conducted in as varied circumstances as possible. The whole point of this is to negate the influence of any specific factor and bring to the forefront the true measurement error.

Step 3: Analyse the Results

Once the study has been conducted, the next step is to analyse the result to see if they are as per your requirements. Whether the measurement system is good enough is a question that depends upon the intended usage of the measurements. In case the measurements are going to be used for precision engineering, they need to be highly accurate.

However, some thumb rules have been established. They work, if the process does not require special attention. They are as follows:

Less than 10%: if the measurements are less than 10% different from the actual process variation, the Six Sigma methodology specifies that the measurement system is good enough. There is an assumption that the process is not highly critical like in medical sciences or precision engineering where the accuracy needs to be much higher.

Between 10% to 30%: If the measurements are off-base between 10% to 30% of the actual process variation, they may or may not be accepted, depending on the degree of accuracy required by the team.

Greater than 30%: If the measurements are more than 30% off base, then there is a serious problem with the measurement system and steps must be taken to ensure that time and resources are not wasted making decisions based on faulty data.

If the measurement system fits the bill, the process ends here. If not, an additional step is required i.e. the measurement system must be fixed.

Step 4: Fix Measurement System

It is difficult to state a generalized way to fix measurement system errors. However, since we know that most of the process variation is caused by a handful of factors, we can try fixing them to fix the measurement system.

Change Equipment: Most of the times, wrong measurements are the result of faulty systems. This means that if people are using manual means of collecting data, the organization must consider automating it. It could also mean that the measurement systems are old and faulty and need to be replaced. Depending upon the need of the management and the budget it is willing to expend, the measurement system can be fixed.

Train Operators: In many cases, the measurements are taken manually. This could be either because of the nature of the process. Alternatively it could be because of the management’s reluctance to invest in automation. In this case, the operators must be trained to cut down on the error.

Further Analysis: If results reveal that neither the operators nor the machine are responsible for the dismal performance of the measurement systems, then in that case further analysis must be deployed till the problem is found and fixed.

An iteration of the previous step must then be conducted to close the exercise.

Article Written by

MSG Team

An insightful writer passionate about sharing expertise, trends, and tips, dedicated to inspiring and informing readers through engaging and thoughtful content.

Leave a reply

Your email address will not be published. Required fields are marked *

Related Articles

Characteristics of Data – Central Tendency and Dispersion

MSG Team

Causes of Measurement Variation

MSG Team

Six Sigma – Outputs in the Measure Phase

MSG Team